Rode NT2-A Microfone condensador de estúdio

Rode NT2-A Multi-Pattern Large-Diaphragm Condenser Microphone

The Rode NT2-A is a highly versatile large-diaphragm studio condenser microphone designed to offer pristine audio quality and flexibility in equal measure. Built around an Australian-designed HF1 dual-diaphragm capsule with internal shock mounting, the NT2-A delivers the silky smooth character of legendary vintage condensers from the 1950s and 1960s while embracing modern recording workflows. Three on-body switches put polar pattern, high-pass filter, and pad control directly at the engineer's fingertips, making this model a single-mic solution for nearly any studio scenario.

Three Switches, One Microphone — Total Session Flexibility

What sets the NT2-A apart from most large-diaphragm condensers in its tier is the trio of front-panel controls that turn one microphone into three. The polar pattern switch moves between cardioid, omnidirectional, and figure-8, while the high-pass filter offers flat, 40 Hz, and 80 Hz positions, and the pad steps between 0 dB, -5 dB, and -10 dB. Combined with the gold-sputtered dual 1-inch capsule and transformerless SMT circuitry, this control set lets a single mic cover lead vocals, drum overheads, acoustic guitar, and stereo room capture without swapping hardware.

Polar Pattern Control — Match the Mic to the Source

Polar pattern selection shapes how a condenser rejects or embraces its acoustic environment, and the NT2-A gives engineers three of the most useful options on one body. Cardioid isolates a single source in front of the mic, figure-8 captures two performers facing each other or adds room ambience from the rear, and omnidirectional picks up sound 360 degrees for natural-sounding group vocals and room tone.

• Polar Patterns: Cardioid, Omnidirectional, Figure-8 — three switchable patterns on the mic body for solo, duet, and room capture
• Capsule: HF1 dual 1-inch gold-sputtered diaphragm — Australian-designed transducer voiced for vintage-style smoothness
• Circuitry: Transformerless SMT — ultra-low self-noise and wide dynamic range for clean, detailed capture

Frequency Response and Dynamic Range — Capture Every Detail

A full-range frequency response and high SPL handling let the NT2-A sit comfortably in front of whisper-quiet voice-over artists and loud guitar cabinets alike. The wide 20 Hz to 20 kHz range reaches down to the lowest fundamentals of an upright bass and up to the airy top end of a female vocal, while the high maximum SPL keeps drum overheads and amplified instruments free of distortion.

• Frequency Range: 20 Hz - 20 kHz — full-spectrum response for vocals, acoustic instruments, and room ambience
• Max SPL: 147 dB (157 dB with -10 dB pad) — handles loud drums, brass, and amplified guitar without distortion
• Self-Noise: 7 dB (A-weighted) — quiet enough for intimate vocals and spoken-word recording

On-Body Filters and Pad — Tame Problem Frequencies On the Fly

The integrated pad and high-pass filter switches solve two of the most common studio headaches before they reach the recording. The high-pass filter rolls off rumble from HVAC systems, traffic, and stage vibration, while the pad steps down hot signals from close-miked drums or cranked amplifiers to keep the preamp clean.

• High-Pass Filter: Flat, 40 Hz, 80 Hz — three-position switch reduces low-end rumble and proximity effect
• Pad: 0 dB, -5 dB, -10 dB — three-position switch prevents distortion on loud sources
• Output Impedance: 200 ohms — pairs cleanly with standard studio preamps and audio interfaces

Who Is It For — Engineers, Producers, and Home Studio Owners

The Rode NT2-A is the right choice for project-studio engineers, vocalists, and producers who need a single large-diaphragm condenser that can cover lead vocals, acoustic guitar, drum overheads, and stereo room capture without swapping microphones. Home recordists benefit from the bundled shockmount, pop filter, XLR cable, and dust cover, which together remove the usual accessory shopping list. Tracking engineers who work with loud sources such as guitar cabinets or brass will appreciate the -10 dB pad, while voice-over artists and podcasters gain a quiet 7 dBA self-noise floor and a switchable high-pass filter that keeps plosives and rumble under control.

Rode Heritage — Designed and Built in Sydney, Australia

Rode has built its reputation on studio microphones designed and manufactured in Sydney, Australia, and the NT2-A carries that lineage forward with a heat-treated steel mesh head, durable satin nickel finish, and an industry-leading 10-year warranty. The HF1 capsule is voiced to evoke the silky smooth character of legendary microphones of the 1950s and 1960s, giving the NT2-A a vintage-inspired soul wrapped in modern, switchable versatility.