Escolha o país para entrega da remessa

RockBoard RBO POW ISO 6 IEC Adaptador de alimentação elétrica

Código do produto: 1338177

RockBoard RBO POW ISO 6 IEC Adaptador de alimentação elétrica

Código do produto: 1338177

The RockBoard ISO Power Block V6 IEC is an isolated multi power supply that powers up to six effects pedals from a single mains connection. Six galvanically isolated outputs, advanced high-frequency filtering, and per-slot short-circuit protection keep the signal chain free of hum and digital noise. A 5V USB-A port adds flexibility for small…

RockBoard RBO POW ISO 6 IEC Adaptador de alimentação elétrica

The RockBoard ISO Power Block V6 IEC is an isolated multi power supply that powers up to six effects pedals from a single mains connection. Six galvanically isolated outputs, advanced high-frequency filtering, and per-slot short-circuit protection keep the signal chain free of hum and digital noise. A 5V USB-A port adds flexibility for small accessories, while the compact aluminium housing fits neatly under most pedalboards.

  • 6 galvanically isolated DC outputs plus 1x 5V USB-A port (2000 mA) for accessories
  • 2 switchable outputs (9V/12V/15V/18V) cover a wide range of pedal voltages
  • Per-slot short-circuit protection with dedicated status LEDs
  • Compact 130 x 88 x 35 mm aluminium housing at just 386 g
Ainda não está disponível uma descrição adicional no seu idioma. A descrição em inglês pode ajudar.

Isolated Multi Power Supply for Pedalboards

The RockBoard ISO Power Block V6 IEC delivers clean, noise-free DC power to up to six effects pedals from a single mains socket. Each output is galvanically isolated, preventing ground loops and the high-frequency whine that plagues daisy-chained setups. A 5V USB-A port adds room for charging phones or running USB-driven pedals without a separate wall wart.

What Sets This Power Supply Apart

Every output runs through its own transformer stage, so a short circuit on one pedal will not take down the rest of the rig. Two switchable slots can be set to 9V, 12V, 15V, or 18V, covering standard overdrives through vintage 18V circuits. The universal 100–230V AC input and IEC mains socket mean any kettle lead can be swapped in on the road.

Output Configuration

The layout matches a real-world gigging board: two high-current 9V slots at 500 mA for hungry digital units, two standard 9V slots at 250 mA for analog drives, and two flexible slots that switch between 9V, 12V, 15V, and 18V. All connections use the standard 2.1 x 5.5 mm barrel plug with centre-negative polarity.

  • Switchable outputs: 2x 9V/12V/15V/18V DC — covers standard, mid-voltage, and 18V pedals
  • Fixed 9V outputs: 2x 500 mA + 2x 250 mA — headroom for current-hungry DSP pedals
  • USB-A port: 5V, 2000 mA — powers phones or USB-driven pedals

Protection and Filtering

Each output carries its own short-circuit protection and a dedicated status LED, so a fault on one pedal is isolated and the remaining slots keep running. Advanced filtering tackles high-frequency interference before it reaches the pedal.

  • Isolation: 6 galvanically isolated transformers — eliminates ground loops between pedals
  • Short-circuit protection: per-slot with status LED — one fault does not kill the board

Build and Package

A compact aluminium enclosure sits flat under a pedalboard. Running on 100–230V AC at 47–63 Hz, the IEC mains input works worldwide without a voltage converter. The box includes six 60 cm RockBoard flat power cables and one IEC mains cable.

  • Dimensions: 130 x 88 x 35 mm — slim enough to fit under most boards
  • Weight: 386 g — light enough not to weigh down a gig bag

Propósito
Funções

Número de saídas

6

Entradas e saídas

Polaridade

Centro, menos

USB

Sim

Embalagem

Conteúdo da embalagem

Cabo de alimentação

Fonte de alimentação

Tensão

9V, 12V, 15V, 18V

Tipo de ficha

Barril

Fonte de alimentação

Cabo de alimentação

Acessórios

Fonte de alimentação UK/UE incluída

Não

Dimensões e peso

Largura (mm)

88

Profundidade (mm)

130

Altura (mm)

35

Peso líquido (kg)

0,386

País

Fabricado em

China

Documentos

Instruções de utilização
Informações sobre o fabricante
Fabricante:
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46, 08258, Markneukirchen, Alemanha
Pessoa responsável:
Warwick GmbH & Co Music Equipment KG
Instruções de segurança

Consulta o manual do utilizador para obteres as instruções de segurança específicas para este artigo.