Escolha o país para entrega da remessa

RockBoard RBO POW BLO ISO 10V2 Adaptador de alimentação elétrica

Código do produto: 1338174

RockBoard RBO POW BLO ISO 10V2 Adaptador de alimentação elétrica

Código do produto: 1338174

The RockBoard ISO Power Block V10 is a multi power supply for effects pedals that delivers clean, isolated power to up to 10 stompboxes simultaneously. Eight 9V outputs and two 18V outputs share a total capacity of 2,000 mA, while advanced filtering and individual short-circuit protection keep every pedal running quietly and reliably. 10…

RockBoard RBO POW BLO ISO 10V2 Adaptador de alimentação elétrica

The RockBoard ISO Power Block V10 is a multi power supply for effects pedals that delivers clean, isolated power to up to 10 stompboxes simultaneously. Eight 9V outputs and two 18V outputs share a total capacity of 2,000 mA, while advanced filtering and individual short-circuit protection keep every pedal running quietly and reliably.

  • 10 galvanically isolated outputs (8 x 9V at 150 mA + 2 x 18V at 400 mA) for powering a full pedalboard from one unit
  • Advanced filter technology eliminates high-frequency noise; external transformer blocks low-frequency interference
  • Per-outlet short-circuit protection with status LEDs isolates faults without shutting down the rest of the rig
  • Includes 18V DC adapter with multi-regional plugs, 10 flat power cables, plus voltage and current doubler Y-cables
Ainda não está disponível uma descrição adicional no seu idioma. A descrição em inglês pode ajudar.

Clean Isolated Power for a Full Pedalboard

The RockBoard ISO Power Block V10 is a multi power supply for effects pedals that replaces a tangle of single adapters with one compact unit. Ten transformer-isolated outputs feed up to ten pedals at once, so a complete board of drives, modulations, delays and digital units can run from a single mains feed. The ISO Power Block V10 is the right choice for guitarists, bassists and keyboard players who need quiet, reliable power for a medium-to-large pedalboard without ground-loop hum.

Standout Engineering

Each output sits behind its own isolation transformer, so noise from one pedal cannot bleed into another. Advanced filtering technology in every slot suppresses high-frequency interference, while the external 18V power adapter keeps low-frequency noise away from the audio path. Per-outlet short-circuit protection with a status LED means a single faulty cable will not bring the rest of the rig down.

Power Outputs and Voltage Configuration

  • 9V Outputs: 8 isolated slots, 150 mA each — handles standard analog pedals and most digital units
  • 18V Outputs: 2 isolated slots, 400 mA each — covers power-hungry digital and dual-voltage pedals
  • Total Current Capacity: 2,000 mA — enough headroom for a fully loaded board

Filtering and Protection

  • Galvanic Isolation: transformer-isolated per output — eliminates ground loops between pedals
  • HF Filtering: advanced filter technology in each slot — kills digital whine and RF interference
  • Short-Circuit Protection: per-outlet with status LED — a fault on one slot leaves the others running

Physical Specs and Package Contents

  • Dimensions: 123 x 70 x 26 mm — slim enough to mount beneath a RockBoard or any standard board
  • Weight: 180 g — light enough not to weigh down a touring rig
  • Connector: 2.1 x 5.5 mm barrel, center negative — the industry-standard stompbox plug
  • Included: 18V DC adapter with EU/UK/US/AU plug adapters, 10 x 60 cm flat power cables, voltage doubler Y-cable (blue), current doubler Y-cable (white)

Propósito
Funções

Número de saídas

more than 8

Entradas e saídas

Polaridade

Centro, menos

Embalagem

Conteúdo da embalagem

Adaptador, Cabo de alimentação, Y-Cable

Fonte de alimentação

Tensão

9V, 18V

Corrente

2000 mA

Tipo de ficha

Barril

Fonte de alimentação

Adaptador

Acessórios

Fonte de alimentação UK/UE incluída

Sim

Dimensões e peso

Largura (mm)

70

Profundidade (mm)

123

Altura (mm)

26

Peso líquido (kg)

0,18

País

Fabricado em

China

Documentos

Instruções de utilização
Informações sobre o fabricante
Fabricante:
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46, 08258, Markneukirchen, Alemanha
Pessoa responsável:
Warwick GmbH & Co Music Equipment KG
Instruções de segurança

Consulta o manual do utilizador para obteres as instruções de segurança específicas para este artigo.