Marshall DSL5CR Amplificador combo a válvulas para guitarra
Marca: Marshall
Código do produto: 848711
Marca: Marshall
Código do produto: 848711
Marshall DSL5CR Amplificador combo a válvulas para guitarra
Esta descrição foi gerada de maneira automática por Software de tradução:
Amplificador portátil de 5 watts para uso doméstico ou pequenos shows equipados com alto-falante Celestion 10-30. Tubos pré-amplificados: 3 x ECC83, Power tubo: 1 x 12BH7 / ECC99. Tom real da válvula com calor e resposta orgânicos, nível de potência ajustável , gabinete compacto com um alto-falante Celestion Ten-30 para portabilidade e projeção.O amplificador tem 2 canais com ganho clássico e ultra ganho para capacidade de comutação instantânea de som, juntamente com uma gama versátil de controles EQ (aprimorados para 2018) que permitem esculpir totalmente o seu som, o interruptor de graves que complementa um reforço de graves ressonante, a saída direta emulação Softube - pode ligar a saída directamente a uma mesa de mistura ou dispositivo de gravação e aceder a uma emulação de alta qualidade. Serial FX Loop, Controles: Ganho Clássico: Ganho / Volume, Ganho Ultra: Ganho / Volume, Deslocamento de Tom, Agudos, Médio, Baixo, Profundo, Reverb.
Marshall DSL5CR — All-Valve Tone in a Bedroom-Sized Combo
The Marshall DSL5CR is a 5-watt all-tube combo amplifier that delivers the legendary DSL tone in a compact, apartment-friendly enclosure. Two footswitchable channels — Classic Gain and Ultra Gain — span everything from glassy cleans to aggressive high-gain lead tones, while the rear-panel power reduction switch drops the output from 5 W to 0.5 W so the tubes can be pushed into saturation at conversational volumes. This combo is the right choice for guitarists who want genuine British-voiced Marshall character for home practice, studio recording, and small jam sessions.
What Sets the DSL5CR Apart
Unlike most practice amps in this segment, the DSL5CR is a fully analogue all-valve design — two ECC83 preamp tubes and one 12BH7 power tube drive every note through the signal path. The Deep EQ Shift and Tone Shift switches offer modern scooped voicing and midrange rebalancing beyond a standard three-band EQ, while the emulated line output captures cabinet-simulated tone without a microphone.
Valve Power Stage — Cranked Tone at Any Volume
The all-tube power stage is the heart of the DSL5CR, and the power reduction switch is what makes it usable in any environment. At full 5 W the amp pushes air through the Celestion driver with genuine Marshall authority, while the 0.5 W mode retains the same harmonic character at a fraction of the volume.
- Output Wattage: 5 W with power reduction to 0.5 W — full-tube saturation at apartment-friendly levels
- Preamp Valves: 2 x ECC83 — one dedicated to each channel for clean headroom and gain character
- Power Amp Valve: 1 x 12BH7 — single-ended tube output stage delivering classic Marshall compression
Two Channels, Three-Band EQ, and Tone-Shaping Switches
Independent Gain and Volume controls on each channel give players real flexibility to balance clean and lead tones without compromise. The shared three-band EQ is voiced to work across both channels, and the Tone Shift and Deep buttons add modern tonal options without overcomplicating the front panel.
- Channels: 2 — Classic Gain (clean to breakup) and Ultra Gain (crunch to high-gain lead)
- Controls: Volume, Gain, Treble, Middle, Bass — independent per channel plus shared EQ section
- Tone Shift and Deep switches add modern scooped voicing and resonant bass boost for chunky rhythm tones.
Celestion Driver, Effects Loop, and Silent-Recording Features
The 10-inch Celestion Ten-30 speaker was chosen specifically for balanced response at low volumes, making it ideal for home use. A series effects loop, emulated line output, headphone jack, and aux input cover the full range of practice and recording scenarios.
- Speaker: 10" Celestion Ten-30 (16 Ω, 30 W) — British-voiced driver with strong mids and tight bass
- Effects Loop: 1 x series — integrates time-based and modulation pedals after the preamp stage
- Emulated line output, headphone jack, and aux input cover silent practice and direct recording without a microphone.
- Dimensions: 455 x 240 x 425 mm — Weight: 12.7 kg
Who Should Buy the Marshall DSL5CR
The Marshall DSL5CR is the right choice for home players and recording guitarists who need authentic all-valve Marshall tone without the volume of a full stack. Bedroom practitioners benefit from the 0.5 W power reduction, which lets them drive the tubes into natural breakup at neighbour-friendly levels, while the emulated line output and headphone jack cover silent late-night sessions. Studio players get a portable two-channel workhorse that takes pedals well on the clean channel and delivers genuine Marshall crunch on Ultra Gain. Small-venue players can push the full 5 W output and mic the cabinet or run the emulated out to a PA.
Marshall — A Half-Century of Rock Amplification
Marshall, founded by Jim Marshall in 1962 in Milton Keynes, Great Britain, has shaped rock music history for over six decades. The company's tube amplifiers have powered artists from Jimi Hendrix to Pete Townshend, and the classic JTM, JMP, and JCM 800 designs remain benchmarks for overdriven electric guitar tone. Designed and engineered in the UK, the DSL5CR continues that tradition in a portable format.
Tipo de altifalante
Número de canais
Altifalantes
Número de portas de entrada
FX Loop externo
Interface MIDI
Controlos
Potência
Eletrónica
Tipo de eletrónica no amplificador de potência
Potência (Watt)
Porta de entrada do pedal
Saída para auscultadores
USB
Ligação para altifalante externo
Saída DI
Reverb
Fonte de alimentação
240 V
Fabricado em
Vietname
Todas as avaliações são feitas por clientes verificados que compraram um produto nosso.
Resumo das avaliações por IA
Com base no número de avaliações: 19
Pontos fortes
- Qualidade Sonora: Os clientes elogiam consistentemente o amplificador por seu excelente som, destacando seu timbre valvulado clássico, faixa dinâmica e capacidade de produzir sons limpos e com alta distorção de forma eficaz.
- Qualidade de Construção: O amplificador é descrito como tendo acabamento de alta qualidade e bom material, indicando uma construção robusta e durável.
- Ideal para Uso Doméstico: Muitos usuários o consideram perfeito para praticar em casa, apreciando sua capacidade de fornecer um ótimo som mesmo em volumes mais baixos, graças ao seu atenuador de potência.
- Pedal Incluso: A inclusão de um pedal é vista como um bônus significativo, agregando valor e praticidade ao amplificador.
- Portabilidade: Seu design leve facilita o transporte, o que é uma característica conveniente para os usuários.
Pontos fracos
- Saída de Linha Emulada: Um cliente observou que a saída de linha emulada não se conecta bem com fones de ouvido ou mesas de mixagem, o que era uma limitação esperada.
- Versatilidade do Canal Limpo: Alguns usuários acharam o canal limpo menos versátil do que o esperado, tendo dificuldade em obter um timbre completamente limpo, apesar dos controles de ganho e volume.
- Volume Sonoro em Baixa Potência: Mesmo na configuração de baixa potência, o amplificador pode ser bastante alto, o que pode ser um problema para quem mora em apartamento.
O que os clientes repetem
Veredito
Documentos
Instruções de utilização
Instruções de segurança
Consulta o manual do utilizador para obteres as instruções de segurança específicas para este artigo.
Garantia alargada de 3 anos
Devoluções até 30 dias
Garantia de preço
Mais de 3M de clientes
Apoio profissional