Soundcraft EPM 8 Mesa de mistura

Soundcraft EPM8 — Compact 8-Channel Console with the GB30 Mic Preamp

The Soundcraft EPM8 is a high-performance 8-channel analog mixing console aimed at gigging musicians, small studios and fixed installations that need professional audio quality at a modest footprint. At its center sits the GB30 microphone preamp circuit, originally designed by Graham Blyth to mark the company's 30th anniversary, and the same preamp found in Soundcraft's larger LX7ii and GB Series consoles. That preamp heritage is the EPM8's main selling point: it offers 55 dB of gain range and +22 dB of internal headroom, giving the console more dynamic headroom than most mixers in its segment.

Surface-mount construction with close-tolerance components keeps the EQ and gain controls repeatable show after show, so an engineer can recall settings confidently. The control surface stays intentionally simple — no menus or hidden functions to slow down a live mix.

Standout Mixer Features for Live and Studio Use

What sets the EPM8 apart from other 8-channel desks at this tier is the GB30 mic preamp, a multipoint PEAK LED warning system on every channel, and parallel monitor/headphone outputs that let a performer listen on phones while the engineer works on studio monitors at the same time. Each mono channel carries a TRS insert point, and the mix output is also post-insertable, allowing outboard compressors and EQs to be patched into individual channels or the main bus.

Headroom, EQ and Channel Architecture

Channel headroom and tonal control define the EPM8's daily mix performance. Built around a 55 dB gain window and +22 dB of headroom, the GB30 mic amp keeps loud vocalists and hot drum overheads clear of distortion. EQ is built around a 3-band design with a swept mid on mono inputs (parametric mids) and a 2-band EQ on stereo inputs, giving an engineer focused control over problem frequencies without becoming a full parametric unit.

• Graham Blyth's 30th-anniversary preamp design, the GB30, supplies 55 dB of gain range and +22 dB of headroom across every channel strip.
• Microphone Channel EQ: 3 Bands, Parametric Mids (mono) / 2-band EQ on stereo inputs
• Phantom Power: +48 V global — powers condenser mics of all types on every XLR input

Auxiliary Routing, Metering and I/O

Flexible routing and clear metering make the EPM8 easy to drive live. Two configurable auxiliary buses can be switched between pre- and post-fader operation, so the same console serves both monitor sends and effects sends. A ten-segment LED meter on the output gives accurate level feedback, and PEAK LEDs use multipoint signal take-offs to alert the user before clipping hits any part of the channel strip.

• Auxiliary Buses: 2 configurable (pre/post-fader) — covers both monitor mixes and effects sends
• The output meters use a 10-segment LED per main mix for instant visual feedback.
• Connections: XLR and ¼" metal jack sockets for mic/line inputs, plus RCA phono stereo record/playback

Build, Layout and Practical Specs

The console is arranged for fast hands-on mixing. 60 mm high-quality faders — the same type used on larger Soundcraft desks — sit beneath each channel, and the frame can also be rack-mounted for permanent installations. Built small and light enough to carry to a gig but assembled with surface-mount precision, the unit holds up under repeated transport.

• Faders: 60 mm — long-throw faders, same component family as Soundcraft's larger consoles
• The frame supports permanent rack-mount installation in standard 19-inch cabinets and mobile use alike.
• Insert Points: TRS on all mono inputs and on the mix output — patches outboard processors anywhere in the signal chain

Who Is It For

The EPM8 is the right choice for solo musicians, small bands, houses of worship, schools and small-project studios that want a clean, professional-sounding analog mixer without paying for built-in effects or motorized faders. Solo podcasters and touring acoustic acts will appreciate the GB30 preamp clarity on vocals, while small bands get enough headroom for drums and electric instruments. Because internal effects are not included, this console suits engineers who prefer to run their own outboard reverb or a DAW plug-in chain.

Soundcraft Brand Heritage

Soundcraft has been designing professional mixing consoles since 1973, and the GB30 preamp was created by co-founder Graham Blyth to celebrate the brand's 30th anniversary in 2003. The same preamp later appeared on higher-tier consoles like the LX7ii and the GB Series, sharing identical circuit DNA with desks costing several times more.