Escolha o país para entrega da remessa

RockBoard RBO POWER 9V DC/500 Adaptador de alimentação elétrica

Código do produto: 1338196

RockBoard RBO POWER 9V DC/500 Adaptador de alimentação elétrica

Código do produto: 1338196

The RockBoard Power Supply 9VDC/500mA is a single-output mains adapter built specifically for powering a single 9V effect pedal. It delivers a stable 9V DC at 500 mA through a center-minus 2.1 x 5.5 mm barrel connector, with interference suppression coils housed in a separate inline module for virtually hum-free operation. The 1.90 m cable and…

RockBoard RBO POWER 9V DC/500 Adaptador de alimentação elétrica

The RockBoard Power Supply 9VDC/500mA is a single-output mains adapter built specifically for powering a single 9V effect pedal. It delivers a stable 9V DC at 500 mA through a center-minus 2.1 x 5.5 mm barrel connector, with interference suppression coils housed in a separate inline module for virtually hum-free operation. The 1.90 m cable and interchangeable multi-regional plug adapters (EU, UK, US/CA, AU/NZ) make it a practical replacement or backup supply for studio and stage use worldwide.

  • Output: 9V DC, 500 mA, 4.5 W — enough headroom for a single standard 9V pedal
  • Connector: 2.1 x 5.5 mm barrel, center-minus polarity — matches the vast majority of guitar pedals
  • Input: 100–240 VAC with automatic voltage adjustment — usable on any continent without a converter
  • Cable length: 1.90 m — enough reach from a wall outlet or power strip to a pedalboard
Ainda não está disponível uma descrição adicional no seu idioma. A descrição em inglês pode ajudar.

Reliable 9V DC Power for a Single Effect Pedal

The RockBoard Power Supply 9VDC/500mA is a compact mains adapter engineered to deliver clean, stable power to a single 9-volt effect pedal. It provides a regulated 9V DC output at 500 mA through a 2.1 x 5.5 mm barrel plug with center-minus polarity — the configuration used by the vast majority of guitar and bass pedals on the market. It works equally well as a replacement for a lost original adapter or as a quiet dedicated supply for a small setup.

Engineered for a Quiet Signal Path

What sets this adapter apart from generic wall-warts is the interference suppression coil housed in its own inline module along the cable. By physically separating the filtering components from the mains brick, RockBoard keeps common-mode noise and ground-loop hum away from the pedal's audio path for virtually hum-free operation — a clear advantage in studio recording setups where any mains-borne buzz becomes immediately audible.

Output and Power Delivery

Stable output is the single most important job of any pedal power supply, and this unit is tuned to the most common pedal spec on the market.

  • Output Voltage: 9 V DC — the industry-standard rail for analog stompboxes
  • Output Current: 500 mA — sufficient headroom for a single standard 9V pedal
  • Output Power: 4.5 W
  • Polarity: Center Minus — matches Boss, MXR, TC Electronic and similar pedals

Connector and Cable

The plug-and-cable combination determines how cleanly the adapter reaches the pedalboard in real-world setups.

  • Connector: 2.1 x 5.5 mm barrel — the de facto standard for guitar effects
  • Cable Length: 1.90 m — enough slack to reach from a wall outlet to a pedalboard on the floor
  • Number of Outputs: 1 — single-pedal use only

Worldwide Mains Compatibility

Universal mains support makes this adapter ready for any grid.

  • Input Voltage: 100–240 VAC with automatic voltage adjustment
  • Included Plug Adapters: EU, UK, US/CA, AU/NZ — interchangeable for worldwide travel
  • Weight: 220 g — light enough to throw in a gig bag
  • Dimensions: 78 x 44 x 44 mm

Propósito

Tipo

Adaptador

Tamanho

Comprimento do cabo

1,9 m

Funções

Número de saídas

1

Propriedades

Potência (Watt)

4,5

Entradas e saídas

Polaridade

Centro, menos

Fonte de alimentação

Tensão

9V

Corrente

500 mA

Tipo de ficha

Barril

Dimensões e peso

Largura (mm)

44

Profundidade (mm)

78

Altura (mm)

44

Peso líquido (kg)

0,22

País

Fabricado em

China

Documentos

Instruções de utilização
Informações sobre o fabricante
Fabricante:
Warwick GmbH & Co Music Equipment KG
Gewerbepark 46, 08258, Markneukirchen, Alemanha
Pessoa responsável:
Warwick GmbH & Co Music Equipment KG
Instruções de segurança

Consulta o manual do utilizador para obteres as instruções de segurança específicas para este artigo.