By using two isolated outlets the Series adapter Flex gives you the sum of voltages of the two outlets used. This adapter Flex cable should be used in combination with any of CIOKS standard Flex cables if you want to power an 18 V, 24 V or even a 40 V pedal. It gives you not only the higher voltage but also the possibility to choose the type of plug at the pedal end plus the length you need. The plug type and length is determined by the standard Flex cable used with the adapter Flex.

Please note that the Series adapter Flex makes a series connection of the two outlets used. These two outlets must be isolated from each other. You get the sum of voltages (V) and not the current (mA). If you use it with two 9 V outlets with a 100 mA rating each you’ll get 18 V and still a max. current of 100 mA. If you use it with two 9 V outlets with 200 mA each you’ll get 18 V and max. 200 mA. If you use it with two outlets rated to max. 200 mA set to 12 V you’ll get 24 V and still max. 200 mA.