For sport street riders looking for a heavily ventilated jacket (with a waterproofing component) that also want the aesthetic of speed wrapped into a CE-class AA jacket, we bring you the Control Air H2O.

Its own vibe

• When we created the Control Air H2O jacket, we had a very distinct vision. It was to be the seamless blending of both motorsport (think hard parts at the shoulders) and sportswear (think lamination around the zippers and tonal graphic prints). And unlike in the past - where any item in a ''family'' of jackets / pants / one-pieces - echoed almost identical aesthetics, we did something new. The Control Air H2O jacket is not a direct copy of leather series (jacket and one-piece suit); however, we took the graphics story of the ergonomic gradient shapes built out of diamonds and applied it in its own unique way at the back of the arms. This way, it’s immediately recognizable as a member of the ''Control'' series, but with its own fashion-focused twist.

Stay cool. Stay dry.

• The Control Air H2O is heavily ventilated - think about 2/3 (or slightly more) of the front constructed with PWR|Shell mesh, and about the same ratio around back. That said, we recognize not every day will be as hot as another. For the days when you need some protection against the wind and rain, we included a separately wearable hydratex 2L waterproof membrane.

SEESMART CE-level 1 protection

• SEESMART protectors offer the highest level of flexibility while still passing the EN1621-1:2012 CE-level 1 impact tests in both normal and hot (T+) conditions. Lightweight, highly ventilated, and extremely agile, SEESMART protectors are virtually unnoticeable when riding despite being up to the task of protecting you in the event of an unfortunate mishap. Thanks to their flexible construction, these protectors sit close to your body and follow your anatomy. It allows for a better-fitting and more comfortable silhouette for motorcycle gear; making sure you can look effortlessly stylish while remaining protected on the road.

Prepared for SEESOFT CE-level 2 back protector insert

• An easy upgrade for additional protection. The prepared pockets are tailor-made to house the SEESOFT armor, giving riders that extra peace of mind when on the road. They can be put in or taken out easily and quickly and don’t interfere with daily riding activities.

Short connection zipper

• Its intention is to create a secure connection between the trousers / jeans and your jacket / overshirt to minimize and / or eliminate the jacket exposing your skin while in the riding position.

Jeans loop

• Not only does it help prevent the jacket from riding up when on a motorcycle, but it also helps prevent unnecessary exposure of skin while on the open road.

FIT

Regular fit

• The Regular fit is designed for comfortable wear, and it’s tailored to suit different body shapes and sizes. However, it is not considered loose. It falls around the body instead of conforming to the rider's physique.

COMFORT FEATURES

Adjustability

• Adjustment strap at waist
• Adjustment tab at upper arm

Pockets

• Two slit pockets on front
• Waterproof inner pocket within waterproof liner: The internal pocket within the waterproof liner is waterproof.

Lining

• Mesh

Features

• Short connection zipper
• Soft edge at collar: For extra comfort, the inside of the collar is covered with a soft fabric.

CLIMATE REGULATION

Waterproofing

• Detachable hydratex|Lite liner

Ventilation

• Fully ventilated mesh

PROTECTION

Protection

• 3D mesh protector pockets
• Prepared for SEESOFT CE-level 2 Insert Back Protector: The back protector pocket in this REV'IT! garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV - an easy upgrade to maximize safety.
• SEESMART CE-level 1 Elbow Protectors
• SEESMART CE-level 1 Shoulder Protectors
• TPU protection at shoulder

Outer shell material

• High density polyester 600D: This fabric takes polyester yarn and weaves it with a finer polyester yarn, to create a high woven density that increases protection and abrasion-resistance.
• Polyester ripstop
• PWR|Shell mesh: This PWR|Shell is knitted in an open structure, to allow for breathability and flexibility, which maintains comfort as well as safety.

Visibility

• Laminated reflection on back: Reflection panels ensure excellent visibility at all angles, allowing the wearer to be seen from all directions. To offer a more sophisticated look, the reflection panels are welded to the fabric. This welding process also eliminates stitching seams, making the garments safer.

CARE

Outershell

• Machine wash 30°C, mild cycle.
• Do not bleach.
• Do not tumble dry.
• Do not iron.
• Do not dry clean.

Warnings

• Do not use softener.
• Fasten closures before use / cleaning / impregnation.
• Refer to the user manual.
• Remove protectors before cleaning.
• Wash inside out.

Removable waterproof liner

• Machine wash 30°C, mild cycle.
• Do not bleach.
• Do not tumble dry.
• Do not iron.
• Do not dry clean.

Warnings

• Do not use softener.
• Fasten closures before use / cleaning / impregnation.
• Use mild detergent.
• Wash inside out.

CERTIFICATION

• This garment is certified according to the EN 17092 Standard, published in 2020 and has achieved AA rating.