Código do produto: D-PD-AMP-DETONATOR | ID: 226275
Esta descrição foi gerada de maneira automática por Software de tradução:
É um fato bem conhecido que a execução de dois amplificadores não é apenas uma diversão enorme, mas também uma forma consagrada pelo tempo de alcançar tons maiores no palco e no estúdio. Seja trocando entre dois amplificadores diferentes por suas características individuais (ritmo e lead, por exemplo) ou usando-os simultaneamente para enormes paredes de som, os profissionais vêm usando essa configuração há décadas. Conseguir isso facilmente, no entanto, sempre foi um problema para os guitarristas.
Poor quality passive ABY boxes/line selectors load the guitar signal
down, degrading the tone and rendering the whole exercise almost
pointless. Not to mention ground hum issues caused by non-isolated
outputs. On the other hand, active ABY pedals are in short supply and
are usually quite cumbersome. Driving long cables is no problem as the
Amp Detonator’s buffered low impedance signal ensures your input’s upper
frequencies are maintained. Output B features an isolating transformer
which eliminates common ground loop hum when using two amps
simultaneously. The transformer output has been engineered for maximum
transparency, correcting some of the tone-altering characteristics that
affect many other ABY boxes. Two amps out of phase with each other sound
awful but many ABY switchers ignore this. Even if the amps are in
phase, running different pedal chains to each amp can reverse the
polarity of the signal, causing the two signals to be out of phase when
engaging both amps. The Amp Detonator addresses this with a simple fix
on the top of the unit. The only active ABY switcher that can be powered
by battery as well as a 9 or 12V DC adapter. It also features an
internal charge pump circuit which doubles the voltage internally to
18V, increasing the internal headroom for incredibly low harmonic
distortion.
Parâmetros e especificações
Pontuação geral com base em 4 avaliações dos utilizadores: