Lenco LS-500 Oak Kit de gira-discos
The Lenco LS-500OK turntable is a complete vinyl-ready package: belt-drive deck, built-in amplifier, and two separate wooden speakers delivering 2 x 30 W RMS. Designed for plug-and-play listening, it plays both 33 and 45 RPM records and streams music from any phone or tablet via Bluetooth 4.2. The walnut finish and removable dust cover give it a classic look that suits living rooms, studies, and bedrooms alike.
- Audio-Technica AT-3600 moving-magnet cartridge pre-installed for accurate tracking from the first spin
- Two external wooden speakers with 2 x 30 W RMS output allow the system to fill a room without needing a separate amplifier.
- Bluetooth 4.2 receiver streams music from phones and tablets within a 10 m range
- Adjustable counterweight, anti-skating, and mechanical arm lift protect records and extend stylus life
Lenco LS-500OK Turntable — Complete Vinyl System in One Box
The Lenco LS-500OK turntable ships as a ready-to-play package: belt-drive deck, built-in phono preamp, and two wired wooden speakers. Drop a record on the aluminium platter, switch between 33 and 45 RPM, and music plays through the bundled 2 x 30 W RMS speakers with no extra components needed. Bluetooth 4.2 reception turns this model into a wireless speaker for phone or tablet streaming. The walnut finish and removable dust cover suit any shelf or sideboard.
What Sets It Apart
Most all-in-one decks cut corners on the cartridge, but the LS-500OK ships with an Audio-Technica AT-3600 moving-magnet cartridge pre-mounted on a standard headshell. The straight tonearm carries an adjustable counterweight and anti-skating, so stylus pressure can be tuned for cleaner tracking and longer record life. A switchable phono stage leaves room to upgrade to a dedicated amp later.
Drive, Speeds, and Signal Chain
The belt-drive motor isolates the aluminium platter from motor vibration, keeping wow and flutter below ±0.15 % at both speeds. A 72 dB signal-to-noise ratio keeps surface noise low during quiet passages, while RCA outputs and wired speaker terminals sit on the back panel alongside a 1.83 m mains cable.
- The unit features belt drive with 33 RPM and 45 RPM speeds, making it compatible with full LPs as well as 7", 10", and 12" singles.
- Cartridge: Audio-Technica AT-3600 (MM) — proven moving-magnet tracking out of the box
- Tonearm: 218.5 mm effective length, 18.5 mm overhang — geometry matched to the supplied headshell
- Wow and Flutter: ±< 0.15 % at both speeds; Signal-to-Noise: 72 dB; Bluetooth: 4.2, receive, up to 10 m
Who This Instrument Is Built For
It is the right choice for first-time vinyl owners and casual listeners who want a complete system without researching separate amps, speakers, and phono stages. Its plug-and-play setup suits anyone moving into a first apartment or returning to records after years away. Bluetooth streaming adds value for households wanting the same deck to handle phone playlists between record sides.
Lenco — Swiss Vinyl Heritage Since the 1960s
Lenco is a European audio brand founded in Switzerland after the Second World War, with turntable production stretching back to the 1960s. The instrument continues that lineage in a modern all-in-one form, pairing a classic belt-drive deck with contemporary wireless features for today's living spaces.
Condução
Mudança de velocidade
Controlo manual da velocidade
Variação de velocidade
33: ±1%, 45: ±1%
Braço
Alumínio
Comprimento efetivo do braço
218.5 mm
Elevação do braço
Manual
Prato
Lançamento
Wow e Flutter
Pré-amplificador integrado
Sim
Amplificador de potência integrado
Sim
Altifalante incorporado
Não
CD-R/RW
Não
WiFi
Não
Bluetooth
Sim
Sistema de montagem
Horizontal, Tabela
Pacote
Yes
Posição do braço
Right
Ecrã
Não
Potência (Watt)
60
Gama de frequências
Relação sinal/ruído
Entradas
Não
USB
Não
Ranhura SD
Não
Saídas
Banana, RCA, Speaker OUT
Cartucho
Audio Technica AT-3600
Conteúdo da embalagem
Manual, Adaptador, Alto-falante (2 x), 45 RPM Adapter, Counterweight, Pano de limpeza, Cartridge, Protetor contra o pó, Slipmat
Funcionamento da bateria
Não
Fonte de alimentação
Adaptador
Altura (cm)
41,8
Largura (cm)
34,6
Profundidade (cm)
12,3
Peso líquido (kg)
5,7
Fabricado em
China
Suportes para monitores de estúdio
Pré-amplificadores fono
Acessórios para gira-discos
Cabos áudio
Discos de vinil LP
Cartuchos Hi-Fi
Suportes para colunas Hi-Fi
Mobiliário para Hi-Fi
Mesas Hi-Fi / TV
Coberturas para gira-discos
Estiletes Hi-Fi
Cabos Hi-Fi
Headshells
Discos
Acessórios para discos de vinil
Pré-amplificadores fono Hi-Fi
Documentos
Instruções de utilização
Instruções de segurança
Consulta o manual do utilizador para obteres as instruções de segurança específicas para este artigo.
Garantia alargada de 3 anos
Devoluções até 30 dias
Garantia de preço
Mais de 3M de clientes
Apoio profissional