Código do produto: WS-6-2 | ID: 1096125
The WS-6.2 is only slightly larger than an 8-inch studio monitor, making it the perfect choice to sit under your desk, or in other tight spaces. The horizontally opposed woofers in the WS-6.2 present as much radiating area as a 10-Inch woofer, but in a much smaller package. As an added benefit, the configuration of the woofers cancels out net vibration, so the sub won’t scoot, buzz, or rattle, even at high SPLs. With 120 dB max SPL, the WS-6.2 will be more than sufficient for most stereo setups, and will work well in small multichannel setups as well. If more SPL is needed, a second WS-6.2 can be added without taking up very much space. You can also look at using larger WS-12 subwoofer.
The WS-6.2 features balanced inputs for either XLR or TRS cables, as well as unbalanced RCA inputs. You can use the 80 Hz crossover if you’re using the sub to extend the low end response of your monitors, use LFE mode to feed the sub a dedicated LFE channel, or turn off the crossover and use an external crossover for greater customization. The 80 Hz crossover is meant for use with Kali’s studio monitors, but it will work well with monitors from most popular manufacturers. When using the 80 Hz crossover, high-passed signal will be sent out via the XLR outputs. The WS-6.2 has a footswitch jack that will let you turn the subwoofer off, and the XLR outputs will send full range signal to your studio monitors. Footswitches are sold separately, and are available at most music retailers. Contact Kali Audio customer service if you need advice in purchasing a footswitch.
Like Kali Audio’s full range monitors, the WS-6.2 includes a front-firing port tube that prevents noise and compression. On most port tubes, air leaves at different speeds from different points of the opening, creating noisy turbulence. This turbulence can be heard as “chuffing,” or an audible air sound coming from the monitor. This sound will add to the noise floor and obscure the details of the low end. The port tube on WS-6.2was designed to ensure that all of the air leaves the port tube at the same velocity. This helps add to the low end response of the speaker, while keeping the bass clean, tight, and devoid of extra noise.
Parâmetros e especificações
Tipo
Tipo de acionador LF
Amplificador de potência do acionador LF
EQ
Woofer
Potência
Gama de frequências
Porta refletora de graves
AUX IN
Entradas
Saídas
USB
S/PDIF
Configuração da amplificação
Potência RMS
Potência RMS (Watt)
Nível de pressão sonora - SPL (dB)
Nível de pressão sonora (SPL)
Conteúdo da embalagem
Cabo de alimentação, Manual
Potência (Watt)
Fonte de alimentação
100V - 240V
Largura (cm)
31
Altura (cm)
36,8
Profundidade (cm)
27,9
Peso líquido (kg)
14,1
Peso
14,1 kg
Fabricado em
China
Acessórios recomendados
Pontuação geral com base em 1 avaliação do utilizador: