Kali Audio IN-8 V2 Black Monitor de estúdio ativo 1 un.

Kali Audio IN-8 V2 — 3-Way Coaxial Studio Monitor with Point-Source Imaging

The Kali Audio IN-8 V2 is a tri-amped nearfield studio monitor built around a coaxial midrange and tweeter sharing a single acoustic point source. An 8-inch woofer, a 4-inch optimized-profile midrange, and a 1-inch textile-dome tweeter each handle a narrower band, reducing distortion and improving headroom. The result is a ruler-flat response from 37 Hz to 25 kHz that exposes every detail of a mix without coloration. The IN-8 V2 is the right choice for engineers who want brutally honest translation from studio to consumer playback.

What Sets the IN-8 V2 Apart in Its Class

Most monitors in this segment use a 2-way design where the woofer and tweeter share the crossover region, creating interference patterns at the listening position. The IN-8 V2 sidesteps that by placing the midrange and tweeter within a quarter wavelength of each other, eliminating off-axis lobing. Equally rare is the low-noise front port tube, engineered so all air exits at the same velocity, removing the chuffing that masks low-end detail in conventional ported cabinets.

Frequency Response and Dynamic Range — Mixing Confidence at Any Volume

The 37 Hz to 25 kHz range covers the full audible spectrum plus useful sub-bass headroom.

• Frequency Response (-10 dB): 37 Hz - 25 kHz — full-spectrum coverage including deep sub-bass
• Frequency Range (±3 dB): 45 Hz - 21 kHz — ruler-flat across the critical mixing band
• Max SPL: 117 dB @ 1 m — enough headroom for full-bandwidth tracking sessions

Tri-Amped Class D Power — 140 W of Clean Headroom

A dedicated amplifier for each driver keeps intermodulation distortion low. The total system power of 140 W is split 60 W to the woofer, 40 W to the midrange, and 40 W to the tweeter, with system THD held below 1%.

• Total Power: 140 W Class D — tri-amped for low distortion across the spectrum
• Power Split: 60 W LF + 40 W MF + 40 W HF — system THD held below 1%

Drivers, Crossovers, and Connectivity — Built for Real Studios

The driver complement pairs an 8-inch paper woofer, a 4-inch optimized-profile paper midrange, and a 1-inch textile-dome tweeter.

• LF to Mid-Range Crossover: 280 Hz — keeps the critical vocal band on a single driver
• Inputs: XLR, RCA, 6.3 mm TRS — balanced and unbalanced sources from any interface
• DSP: Boundary EQ + LF/HF trims — eight room-position presets tuned at The Village Studios

Engineers, Producers, and Immersive-Mix Studios

The IN-8 V2 is the right choice for project-studio engineers and producers who need a reference monitor that translates reliably to club systems, car stereos, and earbuds. Its 117 dB peak SPL and 0.5–4 m listening range suit medium-sized control rooms, while the wall- and ceiling-mountable cabinet makes it equally at home in Dolby Atmos immersive rigs.

Project Independence — Kali Audio's Coaxial Flagship

Kali Audio's IN-Series, branded internally as Project Independence, was built to combine the natural advantages of a 3-way design with the imaging precision of a coaxial midrange and tweeter. The IN-8 V2 is the 8-inch flagship of that lineup.