Features
 Low-profile mic design for minimum visibility
 Crisp, clear, well-balanced microphone response, even at high SPLs
 Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
 UniMount® universal clip-on mount attaches securely to instrument bell and provides excellent shock resistance for the microphone
 Rugged UniMount® 9" gooseneck rigidly holds its shape, keeping microphone accurately positioned even during aggressive play
 In-line power module is equipped with a switchable 80 Hz high-pass filter to control undesired ambient noise
 Interchangeable elements available for hypercardioid and omnidirectional polar patterns
 Included violin mount with hook-and-loop fastener provides an additional mounting option
 
 Specs
 Element Fixed-charge Back Plate, Permanently Polarized Condenser
 Polar Pattern Cardioid
 Frequency Response 40 – 20,000 Hz
 Low Frequency Roll-off 80 Hz, 12 dB/octave
 Open Circuit Sensitivity –49 Db (3.5 Mv) Re 1v At 1 Pa
 Impedance 200 Ohms
 Maximum Input Sound Level 159 dB SPL, 1 Khz At 1% T.H.D.
 Dynamic Range (Typical) 130 dB, 1 Khz At Max SPL
 Signal-to-noise Ratio 65 dB, 1 Khz At 1 Pa
 Phantom Power Requirements 11– 52V DC, 3.5 Ma Typical
 Switch Flat, Roll-off
 Weight (Microphone) 14.5 g (0.5 Oz)
 Weight (Power Module) 90 g (3.2 Oz)
 Dimensions (Microphone) 37.8 mm (1.49'') Long,
 12.2 mm (0.48'') Maximum Body Diameter
 Dimensions (Power Module) 92 mm (3.62") Long,
 18.9 mm (0.74") Diameter
 Cable (Permanently Attached To Microphone), 3.2 mm (0.13") Diameter, 2-conductor Shielded Cable With Hirose Hr10-type Connector