dbx goRack Performance ProcessorProcessador digital de efeitos
Código do produto: DD-GORACK
Portable audio signal processor. The goRack is an easy-to-use portable speaker processor. Based on our industry-leading DriveRack® Series, the goRack sits next to a set of powered speakers and provides powerful signal processing including Anti-Feedback (based on our AFS™ Advanced Feedback Suppression algorithm), Compression, Sub-Harmonic Synth and EQ. Each processing function can easily be enabled or disabled via top-level function buttons, and settings can be adjusted via goRack's large data wheel. Rear panel features combination 1/4"/XLR inputs that can be connected to either mixer outputs or microphones. When using a mic, the goRack's Mic/Line switch selects the proper input sensitivity and gain range while dual gain controls on the top provide independent level adjustment. goRack's 1/8" Aux input allows for direct connection of mobile music players while XLR outputs interface with powered speakers. Dimensions: 155 x 104 x 43 mm - Weight: 0,54 kg
Boss VE-20 Vocal PerformerProcessador de efeitos de voz
Código do produto: VE-20
Looper Mono, beleuchtetes LCD Display, Enhancer, 38 Sek., Sounds: 30 (Preset) + 50 (User), OUT R (XLR), simple use, Delay, Pitch Correction, PHONES/LINE (Stereojack), connector IN (XLR / jack), 2- Harmonist und Pitch Correction, Vocal-Effects Dynamic Compressor-De-Esser, OUT L/MONO (XLR), - at the same time, Reverb, power supply Boss PSA-230, optional power supply
TC Helicon Mic MechanicProcessador de efeitos de voz
Código do produto: VOICETONE-MIC-MECH
Compact vocal effects pedal that features renowned TC-Helicon reverbs, delays and pitch correction, as well as Adaptive Tone function that provides crisp, clean and full sound. It uses 8 effect presets including lush reverbs from VoiceLive series that deliver a great sense of space, and echoes and delays with Tap Tempo feature for excellent timing. It also offers an automatic chromatic pitch correction that guides the user towards “true” note. Effects are controlled via Dry-Wet control for the perfect mix, and Correction amount. Adaptive Tone function for perfect EQ, compression, de-essing and gating can be switched on or off, as well as mic control and footswitch. Pedal is equipped with balanced XLR connectors with mic input gain level control, USB port for firmware and control, and chassis made of two die-cast metal parts with rubberized base for better stability. Power supply and USB cable are included. Dimensions: 140 x 90 x 60 mm. Weight: 420 g.
Radial StageBug SB-1 Active Acoustic DIProcessador de som
Código do produto: SB-1-RADIAL
The Radial SB-1 Acoustic is a high-performance active direct box made for players that are on the move. Made to fit inside a guitar case, the SB-1 is the smallest Radial DI box ever! But don't let the small size deter... this ultra-compact StageBug sounds absolutely terrific! The design begins with standard ¼ instrument input with a thru-put to feed your tuner or your on-stage amp. The ultra-quiet active circuit at once converts the signal from high to low impedance to reduce susceptibility to noise. The signal is then buffered and balanced for long cable runs to the PA system. 48 volt phantom provides the power, so the SB-1 does not require batteries or external supply to make it work. You simply plug in and you are ready to go! The active circuit features a carefully selected 800k-ohm input impedance to eliminate problems with loading while delivering a crisp, clear sound to the audio system. This delivers extra sparkle to the top end when interfacing vintage guitars with low output pickups and is particularly handy should you plan to use it for recording or Reamping. The SB-1 is also equipped with a -15dB pad that reduces the input sensitivity to gracefully handle even the loudest active instruments. This makes the SB-1 perfectly well suited for electric bass and keyboards. To reduce feedback, toggling the 180° polarity switch helps eliminate hot spots on stage that can cause low frequency resonance.
Active direct box for acoustic guitar
Ultra compact to fit in your guitar case
Plug & play easy to use feature set
48V phantom powered, no batteries needed
Radial StageBug SB-2 Passive Direct BoxProcessador de som
Código do produto: SB-2-RADIAL
The Radial StageBug SB-2 Passive is a high-performance direct box made for players who are on the move! Made to fit inside of a guitar case, the SB-2 is ultra compact yet is feature-packed to ensure great performance on any stage. The compact design begins with a ¼" input and thru-put to feed the on-stage amp. This connects to the custom made Eclipse ET-DB3 transformer which performs the impedance matching and balances the signal. When using extra high output instruments, a -15dB pad can be inserted into the signal path. This enables the SB-2 to be used with active basses and digital pianos that often tend to overload the input side of the interface. An innovative stereo-to-mono merge function provides a convenient way to connect stereo keyboards and computers without having to reset the source for mono operation, saving time and input channels on the PA. The SB-2 output features an XLR wired to the AES standard with pin-2 hot. Once connected, the SB-2 delivers a smooth warm sound reminiscent of older vintage gear. The Eclipse ET-DB3 transformer is magical in its ability to handle extreme signal levels with a natural compression that is pleasing to the ears. The transformer also helps eliminate hum and buzz caused by ground loops by isolating the input from the output. This is augmented with a ground lift switch that lifts pin-1 on the XLR for quiet, professional results. These features make the StageBug SB-2 a great choice for electric bass, acoustic guitar and keyboards where small size and big performance matters!
Passive DI for bass, acoustic and keyboard
Ultra compact to fit in your guitar case
Plug & play easy to use feature set
Transformer isolation eliminates noise
Radial StageBug SB-5 Laptop DIProcessador de som
Código do produto: SB-5-RADIAL
The Radial Stage Bug SB-5 is a compact stereo direct box designed to accommodate laptop computers, tablets and other consumer audio products when amplifying the signal through a PA system. The passive design begins with an integrated input cable that connects from the headphone out via a flexible 1.5 m (5') cable that is terminated with a standard 3.5 mm (1/8"") stereo connector. The cable is secured via a clamping strain relief and is wrapped using the sidewinder cleat for easy storage. This of course eliminates having to locate a cable making it easier to deploy in fast paced work environments. Inside, the unbalanced stereo signal is sent to a pair of custom wound transformers which balances the signals for long cable runs - upwards to 100 meters (300'), without noise. Transformers further benefit by isolating the computer from the PA system to help eliminate hum and buzz caused by ground loops. This is augmented with a ground lift switch to further reduce ground contamination.vA choice of output connectors is available including a stereo set of ¼" TRS jacks for full stereo operation or an XLR out that automatically sums the left-right program material to mono. This can save valuable channels on the PA system and makes setup easier in situations where full stereo reproduction is not required. A -15dB input pad may be engaged to reduce sensitivity and enable extra high output sources to be connected without distortion. These features combine to make the SB-5 the perfect tool-kit DI for the AV technician, media manager or traveling musician equipped with a computer.
Stereo direct box for laptop computer
Integral 1.5m cable with sidewinder cleat
Transformer isolation eliminates noise
Plug & play easy to use – no power required
Radial ProDI Passive Direct BoxProcessador de som
Código do produto: PRO-DI-RADIAL
The Radial ProDI is a passive direct box that combines exceptional audio performance with solid dependable construction, making it the ideal general duty direct box for stage and studio. The heart of the ProDI is a custom wound Radial transformer. It features an exceptionally high 140kOhm input impedance to reduce loading while enabling the ProDI to handle extreme signal levels at all frequencies without distortion. This is further improved upon with an internal MuMETAL shield to protect against electromagnetic fields that can cause unshielded transformers to distort. This compact direct box begins with 14-gauge steel I-beam skeleton for added rigidity and Radial's unique book-end design that creates a protective zone around switches and connectors. Glass filled nylon connectors and high cycle switches combine with the mil-spec PCB and internal RF filtering to provide durability and noise-free performance. A full bottom no-slip pad provides both mechanical isolation and electrical insulation to further protect against the rigors of professional touring. The ProDI is ideally suited for instruments such as bass guitar, active acoustics, keyboards and just about anything else! When you consider all of the features and the affordable price tag, it is no wonder the Radial ProDI has become one of the most popular direct boxes ever made. The Radial ProDI… Spectacular performance at a price that anyone can afford!FeaturesCompact passive direct box for stage and studioAble to handle huge transients without distortionTransformer isolation eliminates noisy ground loopsPlug and play easy to use feature set - on stage or in the studio
Radial Pro48 Active Direct BoxProcessador de som
Código do produto: PRO48-RADIAL
The Radial Pro48 is a compact high-performance 48V phantom powered active direct box designed specifically for todays high output instruments. The Pro48's innovative internal switching power supply significantly increases headroom producing less distortion while yielding a smooth, linear response that extends from 20Hz to well above 40kHz. This results in natural, uncolored signal that is as good or better than DI boxes costing several times more. The superior performance makes the Pro48 an ideal candidate for use with battery powered active basses and acoustic guitars that tend to overload other direct boxes. The compact Pro48 is built road-ready with 14 gauge steel throughout. A unique book-end design creates a protective zones around the switches and connectors while the internal I-beam construction assures outside stress will not torque the PC board and deteriorate solder connections. A full bottom no-slip pads adds mechanical isolation and electrical insulation to further extend the Pro48's lifespan. Exceptional sonic performance, great natural tone and an affordable price tag! The Radial Pro48 truly represents a breakthrough in value.FeaturesHigh performance active direct boxIncreased dynamic range and headroom48V phantom powered with switching supplyIdeal for acoustic guitar and bass
dbx 131S (B-Stock)Embalagem abertaArtigo novo, sem danos e com garantia plena. Pode ter sido devolvido imediatamente após o recebimento, pois está embalado em embalagem alternativa
+/- 6/12dB gain, >108dB dynamic range, switchable bypass, clip LED, 50Hz low cut filter (12dB/octave), balanced jack/XLR in/out, 20mm faders, 6/12dB switch, output meter, internal power supply. dimensions: 19"/1U
Alesis Midi Verb 4Processador digital de efeitos
Código do produto: MD4X220
auto level sensing, graphic LCD display, 128 user programs, delay, pitch), up to 3 simultaneous effects (reverb, flanging, chorus, 18-bit converters. dimensions: 19"/1U.
Radial ProD2 Stereo Direct BoxProcessador de som
Código do produto: PRO-D2-RADIAL
The Radial ProD2 is a compact stereo direct box developed specifically to address the needs and challenges of interfacing a stereo keyboard to a professional audio system. This passive DI features two independent channels with separate inputs and thru-puts for the artist's stage amp and two fully isolated outputs for the PA system. At the heart of the design are two high performance Eclipse ET-DB2 transformers. These deliver 20Hz to 20kHz performance with less than 1.5dB deviation above 18kHz and are able to withstand tremendous signal levels without distortion. Unlike active circuits that overload when the signal exceeds the rail voltage, transformers saturate. This creates a pleasing effect that naturally rounds out the tone, acting like a subtle limiter which is particularly advantageous when interfacing the ProD2 with digital pianos, samplers and drum machines that can produce excessive dynamics. Transformers are particularly adept at eliminating hum and buzz caused by ground loops. As with all Radial products, the ProD2 is built tough to handle the rigors of professional touring. A 14-gauge steel ultra rigid i-beam skeleton frame eliminates opportunity from outside stress to flex the sensitive PC board and cause premature solder joint failure. The innovative book-end design creates a protective zone around the connectors and switches further increasing lifespan. And a full bottom no-slip pad adds mechanical isolation and electrical insulation to further reduce opportunity for noise. The Radial ProD2's warm sound, legendary build quality and compact design have made it the most popular stereo direct box made today.
Stereo direct box designed for keyboards
Smooth, warm sound rounds out digital edge
Able to handle huge transients without choking
May be rack mounted for touring rigs
Radial ProAV2 Multimedia DIProcessador de som
Código do produto: PRO-AV2-RADIAL
The Radial ProAV1 and ProAV2 are passive direct boxes specifically developed with the audio-video integrator in mind. The ProAV1 features a variety of stereo inputs that are summed mono via a resistive mixer, greatly simplifying signal management. The ProAV2 delivers two discrete channels where full stereo functionality is required. To eliminate the need for various adaptors, both units are equipped with a 'Swiss Army' array of connectivity options including 1/4" inputs for instruments, RCA and 3.5mm (1/8") connectors for CD players, iPods, video decks and computers. The ProAV1 also features a female XLR input for interfacing equipment with +4dB professional signal levels. The front panel connectors can also be used as thru-puts to allow multiple patch points. Custom wound Eclipse ET-DB2 transformers are able to withstand exceptionally hot signal levels while maintaining linearity from 20Hz to 20kHz. The resulting smooth Bessel curve is warm and natural, making them particularly adept at handling digital sources that can sound harsh. Transformer isolation further benefits by eliminating hum and buzz caused by ground loops or DC offset problems. These features combine to make the ProAV1 and ProAV2 'must have' problem solvers for the audio-visual technician's tool kit. Stereo inputs and outputs.
'Swiss Army knife' direct box for multi-media
Easy to use, ultra-quiet passive design
Eliminates ground loops that cause hum and buzz
Handles huge transients without distortion
Radial JDI Passive Direct BoxProcessador de som
Código do produto: JDI-RADIAL
The Radial JDI is a passive direct box designed to handle extreme signal levels without distortion of any kind. Unlike an active DI that is limited by the buffering amplifier’s rail voltage, the JDI employs a Jensen audio transformer as the engine. Jensen transformers are legendary in their ability to gracefully handle transients while delivering a smooth, warm sounding Bessel curve, reminiscent of the finest vintage gear. Ruler flat from 10Hz to 40kHz and with virtually zero phase deviation, the JDI delivers the natural, pure sound of the instrument without artifact. The 100% passive circuitry inside the JDI is incredibly efficient. The transformer performs both high-to-low impedance conversion and signal balancing at the same time with minimal loading and does so without any power whatsoever. The transformer also introduces a magnetic bridge that passes signal while rejecting stray DC voltage. This makes the JDI particularly adept at eliminating hum and buzz caused by ground loops. Features include input and throughput 1/4 ” connectors, -15dB input pad, ground lift, and 180o degree polarity reverse to help phase align the instrument with the PA. A secondary circuit is added for direct interfacing with high output devices such as guitar or bass amp loudspeakers plus a unique merge function allows stereo sources such as keyboards to be summed mono, saving valuable input channels. Built tough to handle the abuse of live touring, the JDI features a 14-gauge steel I-beam inner frame and a unique book-end outer shell. The innovative design eliminates stress on the PCB, reducing opportunity for solder joints to go ‘cold’ while the outer shell creates a protective zone around the switches and connectors. The steel casing resists noise-causing electromagnetic pollution and the transformer’s sensitive inner workings are further protected from magnetic fields with a MuMETAL can. This ensures the signal transfer is quiet and free from hum. These combined features have made the Radial JDI the most popular passive direct box in professional touring and an excellent choice for instrument interface in the studio! FeaturesJensen Transformer equipped passive DIEliminates hum and buzz from ground loopsVirtually zero phase & harmonic distortionExceptional signal handling and noise rejection
Radial USB-Pro Stereo USB Laptop DIProcessador de som
Código do produto: USB-PRO-STEREO-RADIAL
The Radial USB-Pro is a high-resolution stereo digital audio converter (DAC) and direct box that is designed to connect to any computer system to seamlessly transfer digital audio to analog. A stereo pair of balanced XLR audio outputs with adjustable level control then feeds the signal to a microphone preamplifier, PA system, mixing console or even a powered speaker! Made for plug and play simplicity, the USB-Pro will automatically be listed as an available sound card in the audio settings in all popular operating systems including Windows XP, Windows 7/8, and Mac OSX. Connection to a computer is accomplished through a standard USB type-B port. Digital-to-analog conversion can be monitored on headphones through the 3.5mm analog output to check signal quality and level before connecting to a sound system. A mono-sum switch may be engaged to check for phasing or for connection to a mono system. Should hum or buzz caused by ground loops be encountered, two recessed side-access switches allow the user to insert isolation transformers into the signal path. To further reduce susceptibility to noise, this is augmented with a ground lift switch that lifts pin-1 on both XLR jacks. As with all Radial products, the USB-Pro is designed to handle the rigors of professional touring. Our unique book-end design creates protective zones around the switches, connectors and controls to keep them out of harm's way. Inside, our time-tested I-beam construction assures the sensitive internal PC board will not torque, which could cause premature part failure. Finally, a full bottom no-slip pad provides mechanical isolation and electrical insulation to ensure quiet operation.
High performance 24bit digital audio converter
Ready to use without the need of a driver
3.5mm analog headphone output to check signal
Balanced Lo-Z outputs with switchable isolation
Behringer DEQ 2496 ULTRACURVE PRO (B-Stock)Embalagem abertaArtigo novo, sem danos e com garantia plena. Pode ter sido devolvido imediatamente após o recebimento, pois está embalado em embalagem alternativa
feedback destroyer and three dynamic EQs per channel). 61 band RTA that can run simultaneously with the EQ section, 10-band parametric EQ, balanced inputs and servo-balanced outputs with gold-plated XLR-connectors and AES/EBU and S/PDIF connections (XLR and optical), 24bit/96kHz A/D and D/A converters and two high performance 32/40bit floating point digital signal processors. 113dB dynamic range, dimensions: 19" x 1U
Soundking AM 402Processador de som
Código do produto: AM402
Passive one-channel DI-box with integrated transformer that combines great durability and reliability with an affordable price. DI-box converts high-impedance non-symmetrical instrument signal (from guitar, bass guitar, microphone…) to the balanced link signal which could be directly use for mixing. It also eliminates unwanted distortion. Dimensions: 100 x 130 x 40 mm. Weight: 350 g. Black colour.
IMG Stage Line MC-31Processador de som
Código do produto: MC-31
3-way microphone combiner with 3 inputs and 1 output that allows for connection of up to 3 microphones to one mic input of a mixer or other devices. It features balanced XLR connectors with impedance of 200 Ohm and robust metal housing with very good shielding qualities that makes it suitable for stage applications. Combiner has a frequency range of 20 Hz-20 kHz and can be used with condenser microphones that require phantom power. Dimensions: 125 x 55 x 75 mm. Weight: 570 g.
IMG Stage Line MPS-1Processador de som
Código do produto: MPS-1
Microphone splitter for distributing one input signal to two outputs, e.g. monitor mixer and main mixer. It features XLR connections (600 Ohm) for input and output, with a galvanically isolated output with ground lift switch and feed-through output. Frequency range: 35-30000 Hz. Dimensions: 100 x 80 x 40 mm. Weight: 310 g.
Behringer DI 20 ULTRA-DIProcessador de som
Código do produto: DI20
Active 2-channel DI-box that takes the signal directly from an unbalanced high-impedance output and feeds it directly into a mixing console, recorder or speaker outputs (up to 3000 W), while providing impedance and signal matching. It converts 2 separate unbalanced 1/4" TRS inputs to 2 balanced XLR outputs. 2-channel/link mode provides flexible use as a mono, 2-channel or splitter box (channel 1 assigns signal to both XLR outputs), so the device is ideally suited for travelling musicians or live/studio/broadcast engineers. DI-box provides ultra-flat frequency response due to servo-balanced operation, and switchable input attenuation in 3 ranges that allows input levels of up to +48 dB, while a ground lift switch eliminates typical ground loop problems. Device is equipped with ultra-rugged metal chassis, TRS and gold-plated XLR connectors. DI-box operates on 9 V battery (not included) or with +48 V phantom power. Dimensions: 152 x 127 x 60 mm. Weight: 650 g. Black and white colour combination.
IMG Stage Line LC-31Processador de som
Código do produto: LC-31
Compact 2-channel 2-way line combiner with 4 inputs and 2 outputs that can be used for connecting 2 mixers to one amplifier and mane other applications. It features one galvanically isolated, balanced XLR input (600 Ω) with ground lift switch for each channel, one balanced XLR direct input for each channel and one balanced XLR output (600 Ω) for each channel. It also features a robust metal housing with very good shielding qualities, suitable for stage applications. Frequency range: 20-20000 Hz. Dimensions: 160 x 55 x 85 mm. Weight: 780 g.
IMG Stage Line DIB-102Processador de som
Código do produto: DIB-102
2-channel DI box with wideband balancing transformer for an optimum signal transmission from musical instrument to a mixer or amplifier and preventing interferences due to matching problems, hum loops and so on. It features 3-fold attenuation switch (0/-20/-40 dB), instrument feed-through output and ground lift switch for each channel, and robust metal housing. Inputs - 2 x 6.3 mm unbalanced jacks, and outputs - 2 x 6.3 mm unbalanced, parallel, and 2 x XLR balanced, are galvanically isolated. Dimensions: 148 x 50 x 130 mm. Weight: 850 g.
ART Z-DIRECTProcessador de som
Código do produto: ZDIRECT
High-quality single-channel passive direct box/interface that allows for connecting instrument, line or speaker-level signals to a mixer or other balanced input through a high-performance audio isolation transformer. High-impedance single-ended 1/4" input is converted by the transformer into an isolated balanced low-impedance signal output. Interface has an extremely flat and wide frequency response which ensures a very clean and neutral sound with wide variety of signal sources and over long signal runs in high noise environments. It also features Input Attenuator switches that allow for a wide range of signal levels, Input Thru for tapping off the signal chain, Ground Lift switch that allows for complete separation of input and output signal grounds, switchable low-pass Bessel Filter that cuts out all very high frequency interference and reduces any digital computer noise, and Phase Invert switch for switching signal polarity right at the source. Rugged anodized all aluminium case is equipped with XLR connectors for balanced outputs. Dimensions: 44.5 x 107 x 89 mm. Weight: 350 g. Black colour.
Nux PML-2 Mini LooperProcessador de som
Código do produto: PML-2-BK
PML-2 offers two audio loops that can be switched by using an external foot pedal. If you are using two rigs on stage or studio that need to be switched often, you will find this portable PML-2 easily solves your problem and saves your time! It’s true-bypass to make sure there is no signal loss.
Nux PDI-1G Guitar Direct BoxProcessador de som
Código do produto: PDI-1G-BK
PDI-1G is a D.I. box to help to get very pure instrument signal to the mixer. With the speaker cabinet simulation function, you can plug your guitar or bass directly to the mixer thru PDI-1G. It also has a PARA OUT that allows you to output the sound of your favorite guitar amp head to the mixer while using the speaker cabinet simultaneously. It is a must for recording and live performance!
IMG Stage Line LSP-102Processador de som
Código do produto: LSP-102
Two-channel 3-way line splitter that provides 2 inputs and 6 outputs for variety of connections, e.g. for connecting one mixer to several amplifiers. It offers one balanced XLR input (600 Ohm) for each channel, two galvanically isolated, balanced XLR outputs (600 Ohm) with ground lift switch for each channel and one balanced XLR direct output for each channel. Splitter features a robust metal housing with very good shielding qualities, suitable for stage applications. Frequency range: 20-20000 Hz. Dimensions: 160 x 55 x 105 mm. Weight: 980 g.
ART SPLITComProProcessador de som
Código do produto: ART-SPLITCOMPRO
Sound processor, microphone splitter. Use the SPLITCom Pro to Split or Combine balanced low impedance microphone signals. As a Splitter: The SPLITCom Pro provides one direct-coupled output and one isolated output from single microphone. Applications include sending the direct output to the main or FOH mixer, and the second isolated output to a monitor or recording mixer. The MAIN MIC OUTPUT passes phantom power from the main mixer to the MAIN MIC INPUT for use with condenser microphones. Phantom power is blocked from passing to the ISOLATED MIC OUTPUT. AS A COMBINER: The SPLITCom Pro provides one output from two microphone inputs. The PHASE switch can be used to invert the relative phase of the ISOLATED MIC INPUT. Applications include dual micing of percussion instruments, choirs, and instrument amplifiers. Phantom power passes through each output to their respective input, (MAIN to MAIN, ISOLATED to ISOLATED), however phantom power is blocked from passing between the MAIN and ISOLATED signal paths. Only the audio passes between the MAIN and ISOLATED signal paths (it is present on all inputs and outputs). Frequency response: 20 Hz - 150 kHz. Dimensions: 47 x 117 x 89 mm. Weight: 320 g
Behringer DI 100 ULTRA-DIProcessador de som
Código do produto: DI100
Active DI-box that provides impedance and signal matching, ultra-low noise op amps and end of hum and impedance problems. DI-box provides -20/40 dB pad, ultra-flat frequency response due to servo-balanced operation, and switchable input attenuation in 3 ranges that allows input levels of up to +50 dB, while a ground lift switch eliminates typical ground loop problems. Device is equipped with ultra-rugged aluminium chassis with stackable oversized rubber corners, TRS and gold-plated XLR connectors. DI-box operates on 9 V battery (not included) or with 15-52 V phantom power.